Window tape OUTSIDE, white, full-surface self-adhesive, alternating, 25m

Window connection tape OUTDOOR, white, full-surface self-adhesive, alternating, 25m

Window connection tape OUTDOOR, white, full-surface self-adhesive, alternating, 25m consists of a plasterable fleece composite with 1 self-adhesive strip, optionally laminated with a butyl strip on one side or alternating. The exterior connection foil is used for quick and secure external, driving rain-proof and diffusion-open sealing of window connection joints and is used as a plasterable external seal.

Installation instructions for window connection tape OUTDOOR, white, full-surface self-adhesive, alternating, 25m

• All profile openings, e.g., cut edges of extensions and window sill profiles or continuous grooves in surface-mounted roller shutter boxes, must be sealed with sealant.
• The surfaces to be bonded on the frame and masonry must be clean and dry, free of dust, grease, and release agents (e.g., on new plastic profiles).
• The surface coating on wooden windows should be several days old, as otherwise escaping solvents can reduce tape adhesion. If necessary, dirt should be removed with grease-dissolving cleaning agents. Material compatibility must be ensured.
• For highly absorbent, crumbling substrates, pre-treat the building with an adhesion promoter, e.g., DRG spray primer, DRG spray adhesive, or solvent-free primer.
• In case of breakouts in the masonry, a clean smooth screed must be created again.
• When bonding, the tapes must be applied to the frame wrinkle-free, in parallel, and pressed through continuously. At the corners, overlap the tapes and bond them driving rain-proof or airtight.
• Movement absorption must be ensured by sufficient loop formation in the area of the connection joint.
• Minimum adhesive width on the window 15 mm, on the wall at least 30 mm.
• The sealing tape must be sufficiently bonded to the masonry in the area of the subsequent plaster covering (rule of thumb: at least 75% of the contact area).